Our R & D department is recognised by Department of
Scientific & Industrial Research (DSIR), Govt. of India
• IS 9103: 1999 (amendment 2007) & ASTM C 494-92 compliant.• Improved pumpability.
• In-house SNF manufacturing facilities for Admixture.• Customised admixtures for GGBS mix concrete.
• High range water reducing and retarding superplasticiser. • High early strength concrete admixture.
• Higher strength with lower Water/Cement ratio.• High water reduction upto 25%
• Best suited for Ready mix concrete.• Sulphate content less than 3%
• Compatible with all types of cement & cementitious material.• Highly plasticizing and excellent workability & cohesiveness
• Control segregation & bleeding.

DESCRIPTION

FLOWCON 06 is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Slump retention with very good workability

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

SPECIFICATION

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but css be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mlo to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 28 is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Slump retention, with workability very good

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

SPECIFICATION

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but css be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mlo to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 21 is ready to use dark brown coloured concrete admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Slump retention, with workability very good

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

SPECIFICATION

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but css be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mlo to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 04 is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with 01 types of cement

Slump retention with very good workability

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

Improves Pumpability

SPECIFICATION

DOSAGE/USAGE

USAGE Generally dosed 0.6 to 1.2% by weight of cementitious material, but can be increased up to 1.4% depending on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

Flowcon — 25 B is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007)

ADVANTAGES

Compatible with all types of cement

Slump retention with very good workability

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

SPECIFICATION

DOSAGE/USAGE

USAGE Generally dosed 0.6 to 1.2% by weight of cementitious material, but can be increased up to 1.4% depending on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

Flowcon — 185 is a super plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability.

ADVANTAGES

Concreting in high temperature conditions

General purpose ready mix concrete.

Highway concrete, bridge deck concrete

RCC, PCC concrete

Suitable for up to M- 40/45 grade of concrete

FEATURES & BENEFITS

Improves workable time by controlled retardation

Improves compaction due to increased workability, without bleeding and segregation

Reduces shrinkage

Lowers permeability.

High ultimate strength without increasing cement content

Compatible with all types of OPC / OPC + Fly Ash / PPC/PSC/GGBS and with other cementitious materials.

SPECIFICATION

DOSAGE/USAGE

Generally dosed in the range of 0.9 to 1.8% by weight of cementitious / cement materials. But go for trial mix for finalizing the dosages

PRECAUTIONS & LIMITATIONS

FLOWCON -185 should not be added in dry mixes under any circumstances. Should be mixed thoroughly before use.

SAFETY

FLOWCON —185 is non-toxic and inflammable. When in contact with skin, it can be washed with water.

DESCRIPTION

FLOWCON 04 VJ is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Higher strength with lower Water/Cement ratio.

Control segregation & bleeding

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but in css may be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 04 C is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Increases the strength with maximum water reduction

Higher strength with lower Water/Cement ratio.

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but in css may be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 04 VH is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.2% by weight of cementitious material, but in css may be increased up to 1.4% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 04 AG is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Increases the strength with maximum water reduction

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

Control segregation & bleeding.

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.0% by weight of cementitious material, but in css may be increased up to 1.2% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON 75 C is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Control segregation & bleeding.

Higher strength with lower Water/Cement ratio.

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

All types of concretes

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.0% by weight of cementitious material, but in css may be increased up to 1.2% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON SP 540 is ready to use dark brown coloured superplasticizing admixture, confirming the specification of ASTM C 494 and IS 9103-1999 (Amendment 2007).

ADVANTAGES

Compatible with all types of cement

Compatible with OPC /OPC+Flyash/OPC+GGBS/OPC+GGBS+Flyash mixes

Slump retention with very good workability

Increases the strength with maximum water reduction

Control segregation & bleeding.

Higher strength with lower Water/Cement ratio.

Control setting of the cement with optimum dosage

Minimises the cost of concrete

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Use upto M 40 Grade of Concrete

SPECIFICATION

DIRECTION FOR USE

Concrete admixture is added to the concrete after addition of desired amount of water during mixing of concrete in mixer.

DOSAGE/USAGE

Generally dosed 0.6 to 1.0% by weight of cementitious material, but in css may be increased up to 1.2% depending up on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

SAFETY

This is non-toxic, non-flammable and non-hazardous; any splash on human body should be immediately washed out with plenty of water.

Copyright 2016 ENDURA IPNR · All rights reserved