Our R & D department is recognised by Department of
Scientific & Industrial Research (DSIR), Govt. of India
• IS 9103 : 1999 (amendment 2007) & ASTM C 494-92 compliant.• Suitable for self flow and self compacting concrete.
• High range water reducing and retarding hyperplasticiser.• Control segregation & bleeding.
• Water reduction upto 40%. • Improved pumpability.
• Higher strength with lower Water/Cement ratio.• Customised admixtures for GGBS mix concrete.
• Best suited for Pre cast and Pre stressed concrete.• Suitable for ultra high strength concrete.
• Best suited for high early strength concrete and high early setting concrete.• High early strength concrete admixture.
• Compatible with all types of cement & cementitious material.

DESCRIPTION

Ready to use high range water reducing concrete hyper plasticizer.

ADVANTAGES

Suitable for Self Compacting Concrete

Suitable for Ultra High Strength Concrete

Helps to achieve High Early Strength

Excellent workability and Workable Retention(can be retained to about 3 hrs)

SPECIFICATION

DOSAGE/USAGE

Generally dosed 0.5 to 1.0% by weight of cement, but can be increased up to 1.2% depending on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

APPLICATION

Various types and grades of concrete

SAFETY

This is non-toxic, non-flammable and non-hazardous, any splash on human body should be immediately washed out with plenty of water.

DESCRIPTION

FLOWCON — PC 164 is a super plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state.

AREA OF APPLICATION

Concreting in high temperature conditions

With very low w/c ratio

Distance pumping purpose

Large pours to prevent cold joints

General purpose ready mix concrete

Highway concrete, bridge deck concreting

High strength concrete

Ready Mix Concrete with higher grade of concrete upto M-80

High performance concrete

FEATURES & BENEFITS

Improves workable time by controlled retardation

Improves compaction due to increased workability, without bleeding and segregation

Reduces shrinkage

Lowers permeability.

High ultimate strength without increasing cement content

Compatible with all types of OPC / OPC + Fly Ash / PPC/PSC/GGBS and with other cementitious materials.

SPECIFICATION

DOSAGE/USAGE

Generally dosed in the range of 0.6 to 1.5% by weight of cementitious materials. But go for trial mix for finalizing the dosages

PRECAUTIONS & LIMITATIONS

FLOWCON — PC 164 should not be added in dry mixes under any circumstances if used for cement reduction without loss in strength, the dose of FLOWCON- PC 164 depends on mix design.

SAFETY

FLOWCON — PC 164 is non-toxic and inflammable. When in contact with skin, it can be washed with water.

DESCRIPTION

Ready to use high range water reducing concrete hyper plasticizer.

ADVANTAGES

Suitable for Self Compacting Concrete

Suitable for Ultra High Strength Concrete

Helps to achieve High Early Strength

Control segregation & bleeding

Best suited for high early strength concrete and high early setting concrete.

Excellent workability and Workable Retention (can be retained to about 3 hrs)

SPECIFICATION

DOSAGE/USAGE

Generally dosed 0.5 to 1.0% by weight of cement, but can be increased up to 1.2% depending on the climatic condition. But, it is recommended to go for trial mix to finalise the dosage.

APPLICATION

Various types and higher grades of concrete more than M 45.

Best admixture for SCC and High early strength concrete

good for PQC and Pre Cast purposes

SAFETY

FLOWCON-50 C is non-toxic and inflammable. When in contact with skin, it can be washed with water.

Copyright 2018 ENDURA IPNR · All rights reserved