Our R & D department is recognised by Department of
Scientific & Industrial Research (DSIR), Govt. of India
• IS 9103: 1999 (amendment 2007) & ASTM C 494-92 compliant.• Improved pumpability.
• In-house SNF manufacturing facilities for Admixture.• Customised admixtures for GGBS mix concrete.
• High range water reducing and retarding superplasticiser. • High early strength concrete admixture.
• Higher strength with lower Water/Cement ratio.• High water reduction upto 25%
• Best suited for Ready mix concrete.• Sulphate content less than 3%
• Compatible with all types of cement & cementitious material.• Highly plasticizing and excellent workability & cohesiveness
• Control segregation & bleeding.

DESCRIPTION

Flowcon — 40 M is a super plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state.

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Highway concrete, bridge deck concreting

Suitable for Self Compacting Concrete up to M-45/50 grade of concrete.

FEATURES & BENEFITS

Improves workable time by controlled retardation

Excellent with low sand mix.

Improves compaction due to increased workability, without bleeding and segregation.

Reduces shrinkage.

Lowers permeability

High ultimate strength without increasing cement content.

Compatible with all types of OPC / OPC + Fly Ash / PPC/PSC/GGBS and with other cementitious materials.

SPECIFICATION

DOSAGE/USAGE

Generally dosed in the range of 0.7 to 1.7% by weight of eementitious materials. But go for trial mix for finalizing the dosages.

PRECAUTIONS & LIMITATIONS

FLOWCON-40 M should not be added in dry mixes under any circumstances if used for cement reduction without loss in strength, the dose of FLOWCON-40 M depends on mix design.

SAFETY

FLOWCON-40 M is non-toxic and inflammable. When in contact with skin, it can be washed with water.

DESCRIPTION

Flowcon — 150 M is a super plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state.

AREA OF APPLICATION

Concreting in high temperature conditions

Large pours to prevent cold joints

General purpose ready mix concrete

Highway concrete, bridge deck concreting

Suitable for Self Compacting Concrete up to M-45/50 grade of concrete.

Concrete with high retention time

FEATURES & BENEFITS

Improves workable time by controlled retardation

Increased workability, without bleeding and segregation.

Reduces shrinkage

Lowers permeability

With low fines excellent cohesive mix.

High ultimate strength without increasing cement content.

Compatible with all types of OPC / OPC + Fly Ash / PPC/PSC/GGBS and with other cementitious materials.

SPECIFICATION

DOSAGE/USAGE

Generally dosed in the range of 0.7 to 1.7% by weight of eementitious materials. But go for trial mix for finalizing the dosages.

PRECAUTIONS & LIMITATIONS

FLOWCON - 150 M should not be added in dry mixes under any circumstances if used for cement reduction without loss in strength, the dose of FLOWCON-150 M depends on mix design.

SAFETY

FLOWCON —150 M is non-toxic and inflammable. When in contact with skin, it can be washed with water.

DESCRIPTION

Flowcon — 06 R is a super plasticizing & retarding admixture for concrete which provides a plastic and cohesive concrete mix with increased durability and reduced shrinkage in the hardened state.

AREA OF APPLICATION

Concreting in high temperature conditions

General purpose ready mix concrete.

Highway concrete, bridge deck concrete

RCC, PCC concrete

FEATURES & BENEFITS

Improves workable time by controlled retardation

Excellent with low sand mix.

Improves compaction due to increased workability, without bleeding and segregation

Reduces shrinkage.

Lowers permeability

High ultimate strength without increasing cement content

Compatible with all types of OPC / OPC + Fly Ash / PPC/PSC/GGBS and with other cementitious materials.

SPECIFICATION

DOSAGE/USAGE

Generally dosed in the range of 0.7 to 1.8% by weight of cementitious materials. But go for trial mix for finalizing the dosages.

PRECAUTIONS & LIMITATIONS

FLOWCON -06 R should not be added in dry mixes under any circumstances if used for cement reduction without loss in strength, the dose of FLOWCON-06 R depends on mix design.

SAFETY

FLOWCON — 06 R is non-toxic and inflammable. When in contact with skin, it can be washed with water.

Copyright 2018 ENDURA IPNR · All rights reserved